Environmental Testing is the evaluation of a product in conditions which simulate the physical environments that may harm or adversely affect the products performance. Environmental testing can play an important role throughout a product's development cycle to ensure that the materials and manufacturing processes can survive the stresses of the environment in which the product is likely to operate. These environments may include high and low temperatures as well as quickly changing temperatures. Also, temperature humidity environments may also be a factor. Environments with an added media such as dust, ice and freezing rain may also have an adverse effect on products. Listed below are some of Global Testing Services Environmental Testing capabilities
Our Capabilities
Thermal Exposure from –70 C to + 300 C
Thermal Cycling/Shock Environment from –70 C to + 200 C
- Thermal Cycle
- Powered Thermal Cycle
- High Temperature Storage
- Low Temperature Storage
Temperature and Humidity Environment from 5-100% Relative Humidity
- Steady State Humidity
- Cyclic Humidity
- Surface Insulation Resistance
- Temperature Humidity
Temperature Under Pressure Environments
- Highly Accelerated Stress Test (HAST)
- Autoclave
Media Environment
- Water Immersion
- Dust
- Ingress Protection (IP Testing)
- Ice and Freezing Rain
- Salt Atmosphere
Common Temperature and Humidity Test Specifications
AEC Q100-
Stress Test Qualification for Integrated Circuits
AEC Q101-
Stress Test Qualification for Discrete Semiconductors
AEC Q200-
Stress Test Qualification for Passive Components
ANSI/EIA-364-1000.01-
Environmental Test Methodology for Assessing the Performance of Electrical Connectors and Sockets Used in Business Office Applications
ANSI/UL 1598-
Standard for Safety for Luminares
ASTM B537-
Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
ASTM B571-
Standard Practice for Qualitive Adhesion Testing Metallic Coatings
ASTM D380-
Standard Test Methods for Rubber Hose
ASTM D618-
Standard Practice for Conditioning Plastics for Testing
ASTM D714-
Standard Test Method for Evaluating Degree of Blistering of Paints
ASTM D865-
Standard Test Method for Rubber-Deterioration by Heating in Air (Test Tube Enclosure)
ASTM D903-98-
Standard Test Method for Peel or Shipping Strength of Adhesive Bonds
ASTM D1735-
Standard Practice for Testing Water Resistance Using Water Fog Apparatus
ASTM D1748-
Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
ASTM E831-
Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ATPD-2167-
Environmental Test Methods M1 Tank
BMW GS 95003-4-
Electrical/Electronic Assemblies in Motor Vehicles; Climate Requirements
CES 14232-
Standard, Electronic Environmental
DBL-9202-
Decorative Parts in Vehicle Interiors
DIN 50014-
Standard Atmosphere
DIN 50017-
Condensation Water Test Atmospheres
DIN EN ISO 2409-
Paints-Varnishes; Cross-Cut Test
DIN EN ISO 4628-2-
Paints and Varnishes – Evaluation of Degradation of Coatings
Ford 00.00EA-D11-
Environmental Requirements-Non EMC Vehicle Electrical and Electronic Systems
Ford BQ 104-07-
Environmental Test Cycles
GM4348M-
Painted Parts Appearance Requirements
GM6121M-
Performance Requirements for Labels
GM7452M-
Performance Requirements for Exterior Plastic Parts
GM9110P-
Procedure for Testing Switches
GM9123P-
Electronic Module (Interior Mounted,Unexposed Validation Test Standard)
GM9505P-
Automotive Environmental Cycles
GME 00006-
Minimum Performance Requirements for Decorative Chromium Plated Plastic Parts
GMI 12558-
General Specification for Electrical/Electronic Subsystems & Components Environmental Requirements
GMW3172-
General Specification for Electrical/Electronic Components-Environmental/Durability
GMW3191-
Connector Test and Validation Specification
GMW14867-
Performance Requirements of Paints on Interior Plastic Substrates
Honda D6501-03-
General Test Methods for Coating Film Performance
IEC 68-2-14-
Basic Environmental Testing Procedures-Test N: Change of Temperature
IEC 68-2-38-
Basic Environmental Testing Procedures-Part 2: Test Z/AD: Composite Temperature/Humidity Cyclic Test
IPC-SM-785-
Guidelines for Accelerated Reliability Testing of Surface Mount Solder Attachments
IPC-TM-650, Sect. 2.6.7-
Thermal Shock and Continuity (Flexible Printed Wiring)
IPC-TM-650, Sect. 2.6.7.1-
Thermal Shock-Polymer Solder Mask Coatings
ISO 7137-
Aircraft-Environmental Conditions and Test Procedures for Airborne Equipment
ISO 16750-04-
Road Vehicles-Environmental Conditions and Testing for Electrical and Electronic Equipment-Climatic Loads
JASOD001-94-
General Rules of Environmental Testing Methods for Automotive Electronic Equipment
JESD22 A101-
Steady State Temperature Humidity Biased Life Test
JESD22 A103-
High Temperature Storage Life
JESD22 A104-
Temperature Cycling
JESD22 A105-
Power and Temperature Cycling
JESD22 A106-
Thermal Shock
JESD22 A108-
Bias Life
JESD22 A113-
Preconditioning of Nonhermetic Surface Mount Devices Prior to Reliability Testing
JESD22 A118-
Accelerated Moisture Resistance –Unbiased HAST
JIS K5600-1-1-
Testing Methods for Paints-Part 1:General Rule-Sect. 1: General Test Methods (Conditions & Methods)
MIL-STD-108E-
Basic Requirements for Enclosures for Electric and Electronic Equipment
MIL-STD-202G-
Military Standard Test Method for Electronic & Electrical Component Parts
MIL-STD-750D-
Test Methods for Semi-Conductor Devices
MIL-STD-810F-
Military Standard Environmental Test Methods
MIL-STD-883G-
Microcircuits
MIL-STD-2073-1D-
Standard Practice for Military Packaging
MIL-STD-1344A-
Test Methods for Electrical Connectors
Mitsubishi ES-X83239-
Standard Test Methods-Interior Plastic Parts
Nissan NES 28401NDS01-
Basic Physicochemical Environmental Specification of Electronic Parts
SAE J323-
Test Methods for Determining Cold Cracking of Flexible Plastic Materials
SAE J575-
Test Methods and Equipment for Lighting Devices and Components
SAE J1211-
Recommended Environmental Practices for Electronic Equipment Design
SAE J1351-
Hot Odors Test for Insulation Materials
SAE J2544-
Plug-In Relay Test Methods
SAE/USCAR-2-
Standard for Automotive Electrical Connection Systems
SAE/USCAR-15-
Specification for Testing Automotive Miniature Bulb Socket/Circuit Plate Assemblies
TSC1229G-
Test Methods for Connector at Crimped Terminals
TSC7000G-
Test Method for Auto Electrical Equipment
TSC7010G-
Soldering Life Test
Toyota TSM0502G-
General Test Method Regarding Material Properties for Plastic Parts
VW PV 1200-
Environmental Cycle Test
Common Temperature Under Pressure Test Specifications
AEC Q100-
Stress Test Qualification for Integrated Circuits
AEC Q101-
Stress Test Qualification for Discrete Semiconductors
AEC Q200-
Stress Test Qualification for Passive Components
IPC-TM-650, Sect. 2.6.16-
Pressure Vessel Method for Glass Epoxy Laminate
JESD22 A102-
Accelerated Moisture Resistance –Unbiased Autoclave
JESD22 A118-
Accelerated Moisture Resistance –Unbiased HAST
Common Media Environment Test Specifications
ANSI/EIA-362-91A-
Dust Test Procedure for Electrical Connectors and Sockets
ANSI/EIA-364-91A-
Dust Test Procedure for Electrical Connectors and Sockets
ASTM D870-
Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
DIN 40050-
Road Vehicles: Degrees of Protection (IPCode)
Ford B1 104-01-
Water Immersion Test for Painted Parts and Panels
GM4465-
Water Fog Humidity Test
GMW3172-
General Specification for Electrical/Electronic Components-Environmental/Durability
GMW3431-
General Procedure for Testing Switches
IEC 60529-
Degrees of Protection Provided by Enclosures (IP Code)
ISO 16750-2-
Road Vehicles-Environmental Conditions and Testing for Electrical and Electronic Equipment-Electrical Loads
ISO 20653-
Road Vehicles-Degrees of Protection (IPCode)-Protection of Electrical Equipment Against Foreign Objects, Water &Access
JIS D 0203-
Method of Moisture, Rain and Spray Test for Automobile Parts
JIS D 0207-
General Rules of Dust Test for Auto Parts
MIL-STD-202G-
Military Standard Test Method for Electronic & Electrical Component Parts
MIL-STD-750D-
Test Methods for Semi-Conductor Devices
MIL-STD-810F-
Military Standard Environmental Test Methods
SAE J1402-
Automotive Air Brake Hose and Hose Assemblies
SAE J1455-
Joint SAE/TMC Recommended Environmental Practices for Electronic Equipment Design (Heavy-Duty Trucks)
SAE J1625-
Heavy-Duty Circuit Breakers
SAE/USCAR-15-
Specification for Testing AutomotiveMiniature Bulb Socket/Circuit Plate Assemblies
TSC7000G-
Test Method for Auto Electrical Equipment
Testing Services
Custom Testing
- Fixture Design
- Fixture Fabrication
- Custom Test Stands
- Prototype Testing Services
- Product Safety Testing Services
|
Electric Testing
- Dielectric Withstand
- Hi-Potential Testing
- Voltage Drop
- Contact Resistance
- Gate Leakage
- Insulation Integrity
- Dielectric Integrity
|
Corrosion Testing
- Salt Spray
- Salt Fog
- Cyclic Corrosion
- CASS
- SWAAT
- Combined Environment
|
Coating and Finish Durability
- Adhesion
- Impact Resistance
- Gravelometer
- Chemical Resistance
- Cyclic Corrosion
- Hardness
- Chipping Resistance
- Water Immersion
|
Learn More
|
Learn More
|
Learn More
|
Learn More
|
Abrasion/Wear
- Taber Abrasion
- RCA Wear Tester
- Resistance to Crocking
- Washability
- Pencil Hardness
- Finish Adhesion
|
Environmental Testing
- Thermal Cycle
- Powered Thermal Cycle
- High Temperature Storage
- Low Temperature Storage
- Humidity
- Temp-Humidity
- Autoclave
- Dust
- HAST
- Water Intrusion
- Ingress Protection
|
Mechanical Testing
- Flammability
- Solderability
- Drop
- Resistance to Solder Heat
- Destructibility
- Compression/Tension
- Conformal Coat Compatibility
- Resistance to Chemicals
- Resistance to Solvents
- FMVSS
- Package Testing
|
Pressure Testing
- Hydrostatic
- Burst Testing
- Proof Testing
- Leak Pressure
- Cyclic Pressure
- External Pressure
|
Learn More
|
Learn More
|
Learn More
|
Learn More
|